Build post. (It's somthing to post)

boostedfamily · 03-05-2010, 10:36 PM

Ok, so I have started buying the rest of the parts to go with the turbo kit that i picked up from thesteriogod two years ago. The goal is 450+ on a nice pump tune and with E85 to turn up the heat. I have orded the DCR oil set up, with DCR head studes and a billet tensioner for the timing belt. Then it will get BC Stage 3 cams with springs and retainers. The bottom end is getting a rebuild with Crower rods and JE pistons. as for fuel right now I want to go with Rage Tech's 1000hp set-up and 1680 PnP injectors. I'm going with a ACT 6 puck with Xtreme presure plat for the clutch. I have some electronics like a WOT box with 2 step, and a traction control set-up. the nitrious will also be there to see what I can reall do ones I get the E85 tune right.

This forum has been real dead and since Im one of the last SRTs on the site (even though I'm in TX) Im gonna post up dates and pics, I should be done by mid April. I feel like this is my home cause I got alot of help from you guys. I'll update as I get organised and get parts in.

This is the oil kit:
http://www.dcrsrt.com/index.php?act=...d&productId=33

Tensioner and studs:
http://www.dcrsrt.com/index.php?act=...d&productId=14
http://www.dcrsrt.com/index.php?act=...d&productId=26

Bottom End kit: with Crower rods and standard CR and Gates timing belt. This might change if i can get a good price on Aries pistons.
http://www.modernperformance.com/com...t4-p-1222.html

Cams:
http://www.maperformance.com/brian-c...fts-srt-4.html
http://www.maperformance.com/brian-c...kit-srt-4.html

Clutch:
http://www.maperformance.com/act-hd-...eel-srt-4.html

Fuel:
http://www.rage-tek.com/product.php?...cat=251&page=1

Jackhole 101 · 03-06-2010, 06:38 PM

wow...taking it all the way then

wushu_m3 · 03-06-2010, 06:56 PM

should be a pretty stout build when it's all done. good luck

boostedfamily · 03-06-2010, 10:14 PM

Quote:

Originally Posted by Jackhole 101

wow...taking it all the way then

The only thing Im not in for right now is the full race head. The tranny will be the next step.

RobzSRT04 · 03-07-2010, 10:40 PM

nice, I can't wait to tune my car again

boostedfamily · 03-08-2010, 02:21 PM

I built my own dual Walbro external 255 set up from summit last night. It will be -8 from front to back. It will be 700-800 hp capable for E85 and 1000 on gas. I saved a ton of money building it my self. I would do it for any car now that I have done it ones.

wushu_m3 · 03-08-2010, 06:22 PM

how much power are you looking to make?

boostedfamily · 03-08-2010, 09:34 PM

Quote:

Originally Posted by wushu_m3

how much power are you looking to make?

The turbo will be what holds me back some. Ill be running it hard and looking for 475+whp.

Dark · 03-08-2010, 09:37 PM

Sounds like a killer setup but the big question here is how are you going to tune it?

boostedfamily · 03-08-2010, 10:50 PM

Quote:

Originally Posted by Dark

Sounds like a killer setup but the big question here is how are you going to tune it?

DSP. I have the 3bar sensors coming, and the online tunner world is on point. after I get it all sorted out I can go down to Auston about an hour away and have the guy that wrote the DSP software for the SRT-4 to tune it. You can even do PCM controled boost with the DSP.

03-05-2010, 10:36 PM	#1
boostedfamily Member Join Date: Aug 2005 Location: In Texass! Posts: 644	Build post. (It's somthing to post) Ok, so I have started buying the rest of the parts to go with the turbo kit that i picked up from thesteriogod two years ago. The goal is 450+ on a nice pump tune and with E85 to turn up the heat. I have orded the DCR oil set up, with DCR head studes and a billet tensioner for the timing belt. Then it will get BC Stage 3 cams with springs and retainers. The bottom end is getting a rebuild with Crower rods and JE pistons. as for fuel right now I want to go with Rage Tech's 1000hp set-up and 1680 PnP injectors. I'm going with a ACT 6 puck with Xtreme presure plat for the clutch. I have some electronics like a WOT box with 2 step, and a traction control set-up. the nitrious will also be there to see what I can reall do ones I get the E85 tune right. This forum has been real dead and since Im one of the last SRTs on the site (even though I'm in TX) Im gonna post up dates and pics, I should be done by mid April. I feel like this is my home cause I got alot of help from you guys. I'll update as I get organised and get parts in. This is the oil kit: http://www.dcrsrt.com/index.php?act=...d&productId=33 Tensioner and studs: http://www.dcrsrt.com/index.php?act=...d&productId=14 http://www.dcrsrt.com/index.php?act=...d&productId=26 Bottom End kit: with Crower rods and standard CR and Gates timing belt. This might change if i can get a good price on Aries pistons. http://www.modernperformance.com/com...t4-p-1222.html Cams: http://www.maperformance.com/brian-c...fts-srt-4.html http://www.maperformance.com/brian-c...kit-srt-4.html Clutch: http://www.maperformance.com/act-hd-...eel-srt-4.html Fuel: http://www.rage-tek.com/product.php?...cat=251&page=1 __________________ 359HP and 440 TQ nuff said!!! Last edited by boostedfamily : 03-05-2010 at 11:59 PM.

03-06-2010, 06:38 PM	#2
Jackhole 101 Administrator Jackhole 101's Car Info Join Date: Jul 2004 Location: Burke, VA Posts: 8,159	wow...taking it all the way then __________________ DJ TALLNESS! :need to lose to make it right: :I'll confront the stars tonight: :Lemme see the skies: :All my dreams were lies: :did we create the modern myth: :did we imagine half of it: -"I just tend to give you shit Evan Heggakdjgjsdjton (Prince William)" - oneslowneon -The pleasure of the extreme polar fleece!- -makev (3:09:20 PM): DURRRR 7 SERIES WANT CARROTTTT "All of us is real, you got some shit I want, Im'a take it"

03-06-2010, 06:56 PM	#3
wushu_m3 Administrator wushu_m3's Car Info Join Date: Jan 2004 Location: Falls Church, VA Posts: 9,095	should be a pretty stout build when it's all done. good luck __________________ "Bitch who told you to sit down? You better wait for my request!!"

03-08-2010, 02:21 PM	#6
boostedfamily Member Join Date: Aug 2005 Location: In Texass! Posts: 644	I built my own dual Walbro external 255 set up from summit last night. It will be -8 from front to back. It will be 700-800 hp capable for E85 and 1000 on gas. I saved a ton of money building it my self. I would do it for any car now that I have done it ones. __________________ 359HP and 440 TQ nuff said!!!

03-08-2010, 06:22 PM	#7
wushu_m3 Administrator wushu_m3's Car Info Join Date: Jan 2004 Location: Falls Church, VA Posts: 9,095	how much power are you looking to make? __________________ "Bitch who told you to sit down? You better wait for my request!!"

03-07-2010, 10:40 PM	#5
RobzSRT04 Member RobzSRT04's Car Info Join Date: May 2004 Location: Woodbridge, Va Posts: 2,595	nice, I can't wait to tune my car again

03-08-2010, 09:37 PM	#9
Dark Member Dark's Car Info Join Date: Apr 2005 Location: Sterling, VA Posts: 4,831	Sounds like a killer setup but the big question here is how are you going to tune it? __________________ '08 Speed3 \| '06 ZX-10R